The Clone tool provides the current brush to copy from an image or pattern. It has actually many uses: among the most crucial is to repair difficulty locations in digital photos, by “painting over” them through pixel information from various other locations. This method takes a while to learn, but in the hands of a professional user it is exceptionally powerful. Anvarious other important use is to draw patterned lines or curves: view Patterns for examples.

If you want to clone from a picture, rather of a pattern, you should tell which picture you want to copy from. You do this by holding dvery own the Ctrl vital and also clicking in the desired resource picture. Until you have actually set the resource in this way, you will certainly not have the ability to paint with the Clone tool: the tool cursor tells you this by showing


If you clone from a pattern, the pattern is tiled; that is, when the allude you are copying from moves past among the edges, it jumps to the opposite edge and also proceeds, as though the pattern were recurring side-by-side, incertainly. When you clone from an image this does not happen: if you go past the edges of the source, the Clone tool stops developing any type of changes.

You deserve to clone from any type of drawable (that is, any type of layer, layer mask, or channel) to any type of other drawable. You deserve to also clone to or from the selection mask, by switching to QuickMask mode. If this indicates copying colors that the targain does not support (for example, cloning from an RGB layer to an Indexed layer or a layer mask), then the colors will certainly be converted to the closest feasible approximations.

You are watching: How to use clone tool in gimp

From the picture food selection via Tools → Repaint Tools → Clone.

By clicking on the tool symbol

in Toolbox.

By pushing the C keyboard shortreduced.

See the Repaint devices crucial modifiers for a description of key modifiers that have actually the exact same result on all paint tools.


The Ctrl essential is provided to select the source, if you are cloning from an image: it has actually no result if you are cloning from a pattern. You can clone from any type of layer of any kind of image, by clicking the photo display, through the Ctrl essential hosted dvery own, while the layer is active (as displayed in the Layers dialog). If Alignment is set to None, Aligned, or Fixed in tool alternatives, then the allude you click on becomes the beginning for cloning: the photo data at that suggest will certainly be offered as soon as you first begin painting through the Clone tool. In source-selection mode, the cursor alters to a reticle cross symbol



Generally, tool alternatives are presented in a window attached under the Toolbox as shortly as you activate a tool. If they are not, you can access them from the photo food selection bar via Windows → Dockable Windows → Device Options which opens up the choice home window of the selected tool.

Mode; Opacity; Brush; Size; Aspect Ratio; Angle; Spacing; Hardness; Dynamics; Dynamics Options; Force; Apply Jitter; Smooth Stroke; Lock brush to watch

See the Usual Repaint Device Options for a description of tool options that use to many kind of or all paint devices.

Hard edge: this choice gives a difficult contour to the cloned location.


The choice you make below determines whether information will certainly be replicated from the pattern presented above, or from one of the images you have actually open.


If you choose Image resource, you should tell which layer to usage as the source, by Ctrl-clicking on it, before you can paint with the tool.

If you inspect Sample merged it"s what you “see” (color made with all the layers of a multi-layer image) that"s cloned. If it"s unchecked, just the schosen layer is cloned. For even more information about non-damaging picture editing and enhancing with Sample merged view Sample Merge.


Clicking on the pattern symbol brings up the Patterns dialog, which you deserve to usage to pick the pattern to paint with. This choice is only pertinent if you are cloning from a Pattern source.

Sample merged

If this choice is not checked (default), Clone tool samples from the active layer.

If this choice is checked, Clone tool samples from all layers. This allows you to job-related in a non-damaging fashion, without editing and enhancing original pixels: you produce a brand-new layer (transparent) over the image layer; this new layer being active, all cloned pixels will appear in this layer.



The Alignment mode defines the relation between the brush position and also the resource position.

In the adhering to examples, we will certainly use a source image where the sample to be cloned will be taken, and also a destination photo wright here the sample will certainly be cloned (it might be a layer in the resource image)


We will use the largest brush via the Pencil tool. The source is represented right here with a ringed cross.



In this mode, each brushstroke is treated separately. For each stroke, the suggest wright here you initially click is duplicated from the source origin; tbelow is no connection between one brush stroke and one more. In non-aligned mode, various brush strokes will commonly clash if they intersect each other.

Example below: At eexceptionally brand-new brush stroke, the source goes earlier to its initially position. The exact same sample is always cloned.



In this mode, the initially click you make when paint sets the balance out between the source beginning and the cloned outcome, and all succeeding brushstrokes usage the very same counter. Thus, you have the right to usage as many type of brushstrokes as you prefer, and also they will all mesh smoothly through one one more.

If you desire to change the balance out, pick a brand-new source origin by clicking via the Ctrl key pressed.

In the instance listed below, at eincredibly brand-new brush stroke, the resource keeps the same offset it had via the previous brush stroke. So, tbelow is no cloning balance out for the first brush stroke. Here, for the complying with strokes, the resource ends up out of the resource photo canvas; thus the truncated facet.


The “Registered” mode is various from the various other alignment settings. When you copy from a picture, a Ctrl-click will certainly register a resource layer. Then paint in a targain layer will clone each equivalent pixel (pixel through the same offset) from the resource layer. This is valuable as soon as you want to clone components of an image from one layer to one more layer within the same photo. (But remember that you can likewise clone from one picture to one more image.)

At every brush stroke, the resource adopts the position of the computer mouse reminder in the location layer. In the adhering to instance, the location layer is smaller sized than the source layer; so, tright here is no truncated aspect.


Using this mode you will paint through the source origin, unfavor the modes None or Aligned even once illustration a line. The source will not be relocated.

See that the resource remains fixed. The exact same small sample is reproduced identically in a tightened way:


The effects of the Clone tool on transparency are a little bit facility. You cannot clone transparency: if you attempt to clone from a transparent source, nopoint happens to the targain. If you clone from a partly transparent resource, the effect is weighted by the opacity of the resource. So, assuming 100% opacity and a hard brush:

See more: Download How To Day Trade For A Living Pdf ) Day Trading For A Living?

Cloning translucent babsence onto white produces gray.

Cloning translucent babsence onto babsence produces black.

Cloning translucent white onto white produces white.

Cloning translucent white onto babsence produces gray.

Cloning can never boost transparency, but, unmuch less “save transparency” is turned on for the layer, it deserve to alleviate it. Cloning an opaque area onto a translucent area produces an opaque result; cloning a translucent location onto an additional translucent area reasons an increase in opacity.

“Filter” brushes

Tright here are a couple of non-evident ways to use the Clone tool to attain effective impacts. One thing you have the right to carry out is to develop “Filter brushes”, that is, develop the effect of using a filter with a brush. To execute this, duplicate the layer you desire to job-related on, and use the filter to the copy. Then activate the Clone tool, setting Source to “Image source” and Alignment to “Registered”. Ctrl-click the filtered layer to collection it as the source, and also paint on the original layer: you will certainly then in effect be painting the filtered photo information onto the original layer.

History brush

You deserve to usage a comparable technique to imitate Photoshop"s “History brush”, which enables you to selectively unexecute or reexecute alters using a brush. To execute this, begin by duplicating the image; then, in the original, go earlier to the desired state in the image"s history, either by undoing or by using the Uncarry out History dialog. (This need to be done in the original, not the copy, bereason duplicating an image does not duplicate the Unperform history.) Now activate the Clone tool, setting Source to “Image source” and also Alignment to “Registered”. Ctrl-click a layer from one photo, and also paint on the matching layer from the other picture. Depending on how you execute it, this offers you either an “undo brush” or a “reperform brush”.